16x16 Modular Matrix Switch
VM1600Discontinued
The VM1600 Modular Matrix Switch offers advanced access and real-time control of multiple local and remote A/V input devices and displays from a single chassis. The VM1600 allows users to
Features
- Connects any of 16 video sources to any of 16 displays in combination with ATEN Modular Matrix I/O Boards
- Multiple means for system configuration including front-panel pushbuttons, RS-232/422/485 control, and Ethernet connections for web GUI or Telnet
- 4K resolutions – up to UHD (3840 x 2160) and DCI (4096 x 2160) with refresh rates of 30 Hz (4:4:4) and 60 Hz (4:2:0)*
- Seamless Switch™ – features close-to-zero second switching for continuous video streams, real-time switching, and stable signal transmissions*
- Scaler – features a (4K) video scaling function to convert input resolutions to the display’s native resolutions*
- Video wall – allows you to create custom video wall layouts via intuitive web GUI*
- EDID Expert – selects optimum EDID settings for smooth power-up, high-quality display, and use of the best resolutions across different screens
- Audio-enabled – HDMI audio can be extracted and stereo audio can be embedded*
- Bi-directional RS-232 channel – allows you to control the connected serial devices simultaneously through the web GUI
- Supports redundant power module for higher reliability
- Hot-swappable design for easy integration of I/O boards, fan module, and power supplies
- HDCP 2.2 Compatible*
- HDMI: 3D, Deep Color, 4K*
- Consumer Electronics Control (CEC) supported*
- ESD protection for HDMI
- Rack mountable (6U design) * Note: 1. The availability of the features with “*” depends on which I/O board is inserted. 2. When Seamless Switch™ is enabled, 3D, Deep Color, or interlace (i.e., 1080i) formats will not be supported. To use these formats, make sure to disable Seamless Switch™. 3. Videos may not display within range when Seamless Switch™ or Video Wall is enabled, in which case please adjust the display settings on your device.
Video Input
- Interfaces
- Depends on which I/O board is inserted
- Impedance
- 100 Ω
- Max. Data Rate
- 10.2 Gbps (3.4 Gbps per lane)
- Max. Pixel Clock
- 340 MHz
- Compliance
- HDMI (3D, Deep Color, 4K) HDCP Support depends on the boards selected Consumer Electronics Control (CEC) HDBaseT Compatible
Audio
- Input
- Depends on which Input board is inserted
- Output
- Depends on which Output board is inserted
Control
- RS-232
- Connector: 1 x DB-9 Female (Black) Serial Control Pin Configurations: Pin2 = Tx, Pin 3=Rx, Pin 5= Gnd Baud Rate and Protocol: Baud Rate:19200, Data Bits:8, Stop Bits:1, Parity: No, Flow Control: No
- RS-485/RS-422
- Connector: 1 x Captive Screw Connector, 5 Pole
- Ethernet
- Connector: 1 x RJ-45 Female
- EDID Settings
- EDID Mode: Default / Port1 / Remix / Customized (EDID Wizard support)
Connectors
- Power
- 1 x 3-Prong AC Socket
Power
- Maximum Input Power Rating
- 100-240 VAC; 50-60Hz; 1.0A
- Power Consumption
- 378W (Max.) *A power module can be purchased for power redundancy. Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
- Fan
- Airflow: 60 cfm Operating Voltage: 10.8 - 13.8 VDC Operating Temp: -10 - 70°C
Environmental
- Operating Temperature
- 0 - 40°C
- Storage Temperature
- -20 - 60°C
- Humidity
- 0 - 80% RH, Non-Condensing
Physical Properties
- Housing
- Metal
- Weight
- 17.00 kg ( 37.44 lb )
- Dimensions (L x W x H)
- 48.22 x 39.90 x 26.59 cm (18.98 x 15.71 x 10.47 in.)
- Rack Height (U Spaces)
- 6U
- Carton Lot
- 1 pc
- Note
- For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.
