Expansion card adding 2 channels of Dante network audio input to ATEN AP series DSP power amplifiers. Supports 24-bit audio at 44.1 or 48 kHz for integration with Dante-enabled mixers and processors.
Features
- Dedicated for use with ATEN’s AP DSP Power Amplifier series
- Allows AP power amplifiers to receive 2 inputs of highquality, low-latency digital audio via Dante AoIP solution
- Enables AP power amplifiers to easily integrate with Dante-enabled devices, such as digital mixers, processors, and media players
- Supports 24-bit and sampling rates of 44.1 / 48 kHz
- Compatible with Dante Controller software to achieve streamlined workflow
- Easy to be installed into the AP power amplifiers’ expansion slot
- Firmware upgradable via Dante LAN
Network Protocol
- 1000/10000 Mbps
- Dante Ultimo
- Connector
- RJ45
- Audio Sampling
- 24-bit, 44.1/48kHz
Compliance
- Certification
- FCC, CE, UKCA Tested with AP2 Amplifier
Environmental
- Operating Temperature
- 0~50℃
- Humidity
- 0-80% RH, Non-Condensing
- Storage Temperature
- -20~60℃
Physical Properties
- Weight
- 0.12 kg ( 0.27 lb )
- Housing
- Metal Panel
- Dimensions (L x W x H)
- 11.50 x 2.20 x 11.00 cm (4.53 x 0.87 x 4.33 in.)
- Note
- For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.
Firmware
Similar products
AD202E
2-CH Mic/Line In/Out Audio Processor with DSP and Dante
AD400E
4-ch Mic/Line Pre-AMP with DSP and Dante Output
AP206
2 x 60W Power Amplifier with DSP
AP212
2 x 120W Power Amplifier with DSP
AP412
4 × 120W Power Amplifier with DSP
AD004E
DSP Mixer with 4-ch Dante Input
AP902