ATEN Control System - Compact Control Box Gen. 2 with Dual LAN

Name: ATEN Control System - Compact Control Box Gen. 2 with Dual LAN
Brand: ATEN
SKU: VK1200

VK1200

Request a quote Datasheet PDF Manual CAD drawing

Compact room-automation controller with a quad-core CPU, 1 GB memory and two isolated LAN ports for separating control and IT networks. Includes RS-232/422/485, 2 IR/serial ports, 4 relays and 2 digital I/O.

Features

High performance processor embedded with quad-core CPU and 1 GB memory for designing and controlling complex projects
Dual, isolated LAN for secured communication among IT devices
Supports various interface connections for hardware-software integration and mobile device control
DC outputs for power supply connections
USB port for easy project upload
LCD display shows the option for configuration and information display
IR learning function for adding IR device drivers
Web Viewer – integrated with 3rd-party systems or any web-based console for easier room equipment management
Supports IEEE 802.1x authentication protocol for enhanced network security
Supports SNMP and enables IT management software to retrieve information from ATEN controllers
Supports native KNX IP for building management systems
TCP, UDP, Telnet, SSH, HTTP, HTTPS, WebSocket, ONVIF, and PJLink compliant
Supports Pronto formatted IR codes – IR command codes can be entered in Hex format
Supports Modbus protocol – enables integration with Modbus devices, including TCP, RTU and its checksum data
Supports Telnet CLI (command-line interface) mode for third-party system integration
Supports centralized control and management by ATEN Unizon™.
Supports project file backup
Web GUI for easy system configuration
Supports SSH communication for data monitoring
LED indication of connection and hardware status
2 free licenses for mobile control* Note: If you require more than 2 licenses, contact the local sales representative. For more information on licenses, see Specifications.

Memory

SDRAM: 1GB
Flash: 8GB

Interfaces

Serial: • 1 x Programmable Bi-directional RS-232/422/485 Port (1 x 5-Pole Terminal Block Connector, configurable via pin assignments); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd; – Flow Control: None (default) or RTS/CTS • 1 x Bi-directional RS-232 Port (1 x 3-Pole Terminal Block Connector); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd
IR/Serial: • 2 x Programmable IR / Uni-directional RS-232 Port (2 x 2-Pole Terminal Block Connector); IR: TTL level (0 to 5 V) – Carrier Frequency: 10KHz~455KHz; Serial: Uni-directional RS-232 (0 to 5 V) – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd
Relay: • 4 x Relay Channel (2 x 4-Pole Terminal Block Connector); • Normally open, isolated Relays; • Contact Rating: Max 24 VDC, 2A
I/O: • 2 x Programmable Digital Input / Output Channel (1 x 3-Pole Terminal Block Connector); Digital Output: 300 mA sink from 24 VDC Digital Input: – VDC Mode Input Voltage Range: 0 to 24 VDC; Programmable Range: 1 to 24 VDC; – Dry Contact Mode Pull-up 2k ohms to + 12 VDC
Ethernet: • 2 x RJ-45 Female, 10/100/1000Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH Control LAN: • Support DHCP Server • DHCP mode - The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 LAN: • DHCP mode - The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.1.60 Subnet Mask: 255.255.255.0
VDC: • 1 x 12 VDC Output Port (1 x 2-Pole Terminal Block Connector); • Power Supply: 12 VDC, 1A Max
USB: 1 x USB Type A

Switches

Power: 1 x On/Off Switch
IR Learning: 1 x IR Receiver LED

Panel Spec

Size: 1.6"
Resolution: 128X64

Pushbuttons

Select: 3 x Pushbuttons (Up, Down, Enter)
Reset Button: 1 x Semi-recessed Pushbutton
Power Consumption: AC110V:4.7W:81BTU/h AC220V:4.5W:81BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.

Power

Maximum Input Power Rating: 100-240 V AC, 50-60 Hz, 1A

Environmental

Operating Temperature: 0 – 50°C
Storage Temperature: –20 – 60°C
Humidity: 0 - 80% RH, Non-Condensing

Physical Properties

Housing: Metal
Weight: 1.23 kg ( 2.71 lb )
Dimensions (L x W x H): 20.00 x 16.41 x 4.40 cm (7.87 x 6.46 x 1.73 in.)

License

Basic (free): 2 free licenses
Max. No. Allowed: 32 licenses
Note: The ATEN Control Box comes with two free licenses which are stored in the device itself. Each time a mobile device connects to an ATEN Control Box for remote control, one license on the Control Box will be occupied. To purchase and add additional licenses to your ATEN Control Box, contact your local sales representative for more information.
Note: For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.